⎝⎛体育滚球平台⎞⎠

Consulting Hotline: 0371-69597677
      Spiral weighing scale

      Spiral weighing scales are divided into single-tube single-layer and double-tube double-layer. Single-tube single-layer completes measurement and transportation at the same time. With double-tube double-layer structure, the upper layer completes the steady flow and transportation, and the lower layer realizes the measurement and transportation. Good and save space.

      Request a quote related information

      Dear [Helix Measuring Scale] Customer, Hello! You are the 13226th visitor to Tianze Enterprise! Since the establishment of the factory, Tianze has been committed to technology research and development and experience accumulation in the electric power, cement, metallurgy, chemical, tobacco, pharmaceutical and other industries, and has provided hundreds of customers with high quality [spiral metering scales] products!

      Spiral scale

      Spiral weighing scales are divided into single-tube single-layer and double-tube double-layer. Single-tube single-layer completes measurement and transportation at the same time. With double-tube double-layer structure, the upper layer completes the steady flow and transportation, and the lower layer realizes the measurement and transportation. Good and save space.


      Introduction of spiral measuring scale

      The length of the screw feeder can be determined according to the actual situation. According to the user, the material measurement is usually performed by using a double-tube structure. That is to say, a screw conveyor needs to be equipped with the screw weighing scale to complete the material measurement. It is mainly used for powder materials or Measurement of small particle materials; widely used in continuous transportation and dynamic measurement of powdery and bulk materials in cement, chemical, metallurgy, ceramics, grain, transportation and other industries. Commonly used materials are fly ash, slag powder, raw meal powder, pulverized coal, etc. in the cement industry.

      Working principle of spiral measuring scale

      The material is conveyed from the feeding port through the screw conveyor to the metering reamer connected below. The load cell mounted on the metering reamer detects the weight of the material and generates a voltage signal that is proportional to the weighing load and is sent to the controller, and The preset reamer speed data is calculated together (in the case of double-tube measurement, the reamer is running at a constant speed, that is, the speed signal is the design value of the reamer), and the instantaneous flow rate and the cumulative weight value are obtained after calculation. The control system compares the actual flow signal with the set flow signal, and outputs the control signal to the inverter through PID adjustment to dynamically adjust the speed of the feeding reamer to achieve quantitative feeding.

      Features of Spiral Measuring Scale:

      1.Feeding screw has a unique stable flow structure, and the feed powder sinks evenly across the entire feed port cross section, which is not easy to arch and difficult to punch.
      2. The steady-flow feeding screw and the measuring screw are synchronized to adjust the speed. The filling coefficient of the steady-feed screw is 1.0, and the filling factor of the measuring screw is 0.6. When the output is adjusted in a wide range (1:10), the weight signal is true and the measurement High precision.
      3. The spiral blade is made of manganese steel material, which has strong wear resistance and long service life.
      4.Small helical clearance, overcome the problem of backflow punching, and avoid sticking materials in the pipe wall gap
      5. Sealed structure to reduce dust outflow
      6. The stable connection between the feeding screw and the metering screw is a soft connection, and the horizontal installation angle can be adjusted arbitrarily according to the site requirements.

      Performance characteristics of spiral weighing scale

      1. The controller uses FB-DMC-01A intelligent controller;
      2. The combination of gravity weighing and spiral conveying mode to achieve dynamic continuous measurement;
      3. Compact structure, stable and reliable operation;
      4, automatic calibration, automatic measurement system zero point;
      5. Manually set various parameters;
      6. The meter has a self-diagnostic function and can be connected to the DCS system.

      Technical parameters of spiral measuring scale <br /> Measuring accuracy: ± 1%
      Conveying capacity: 0.5 ~ 120t / h
      Maximum inclination of screw conveyor: 30 degrees

      Customized technical service engineer team for power, cement, metallurgy, chemical, tobacco, pharmaceutical and other industries

      The expert team provides you with a quality product solution Top The expert team provides you with a quality product solution

      Harsh raw materials! The quality of the spiral weighing scale, the raw materials play a decisive role! 并在每批原料进厂时都进行苛刻的质量把关,确保能生产出好质量的螺旋计量秤! Tianze Machinery has used many years of production experience to identify a batch of stable quality spiral weighing scale raw material suppliers, and when each batch of raw materials enters the factory, it conducts strict quality control to ensure that it can produce good quality spiral weighing scales!

      Finished products are subject to strict quality inspection! 为您提供的螺旋计量秤并确保电力、水泥、冶金、化工、烟草、制药等行业解决方案实施。 No matter how perfect the production management process is, the product will occasionally have defective products. What Tiantian can do is to optimize the production process, strict quality inspection, high-volume, multi-batch product inspection, and provide you with spiral measurement. Scale and ensure the implementation of solutions in the power, cement, metallurgy, chemical, tobacco, pharmaceutical and other industries.

      Down-to-earth, carry forward the craftsman spirit of the country! Work hard and build Tianze national brand! Thank you for your interest in the product information of Tianze Machinery's official website spiral measuring scales, and welcome your valuable suggestions to jointly promote the international competitiveness of China-made products! If you have any questions about Tianze spiral measuring scale, please call Tianze technical engineer at [13938286965], Tianze Machinery is willing to work with you to realize the Chinese dream together!

      Previous: Powder feeder
      Consulting Hotline: 0371-69597677

      Copyright: Gongyi Tianze Machinery Manufacturing Co., Ltd. Support: Gongyi Enterprise

      天天电玩城 七乐彩 欢乐拼三张 欢乐拼三张